Hey! If faces look odd to you, it's because their construction is not balanced, which creates problems with proportions. Visualize the head in two parts: a ball for the skull, and a lower part for the jaw. Lay out your guide lines taking into account the viewing angle, this will affect the placement of the face.
Keep practicing making faces, it's already very good! ^^
Re! Si tes visage te semblent biscornus, c'est parce que leur construction n'est pas équilibrée, ça créé des problèmes de proportions. Visualise la tête en deux parties: une boule pour le crâne, et une partie inférieure pour la mâchoire. Pose tes lignes de repère en prenant en compte l'angle de vue, cela influera sur le placement du visage.
Continue de t'entraîner à faire des visages, c'est déjà très bien! ^^
Good evening Sylyan, you shouldn't be too hard on yourself either, it's already a good start! There's mainly a problem with the construction of the face, and your eyes are a bit too big and placed too high... Before you start detailing your drawing, make sure to properly prepare the construction by visualizing the general shape of the head, the hairline, and especially the guidelines for the placement of facial features (eyes, nose, ears, mouth), as you can see in my correction! ;)
Bonsoir Sylyan, il faut pas non plus être trop dur avec toi même, c'est déjà un bon début! Il y a surtout un problème de construction dans le visage, et tes yeux sont un peu trop grands et placés trop haut... Avant de te lancer dans les détails de ton dessin, veille à bien préparer la construction en visualisant la forme générale de la tête, la ligne d'implantation des cheveux, et surtout les lignes de repères pour le placement des éléments du visage (yeux, nez, oreilles, bouche), comme tu peux le voir sur mon correctif! ;)
Hello Glokta, great work! The portrait is not my specialty, I will be careful not to give you advice on this point, on the other hand I would just say that the elements of the face, nez-yeux-bloche, are a hair small and placed very down. By moving this part and by resizing it a little you will have a more balanced and even more similar rendering (even if I already find it very similar like that !;)) In any case, it's really good job!
Bonjour Glokta, super travail! Le portrait n'étant pas ma spécialité, je vais me garder de te donner des conseils sur ce point, par contre je dirais juste que les éléments du visage, nez-yeux-bouche, sont un poil petit et placé fort vers le bas. En déplaçant cette partie et en la redimensionnant un peu tu auras un rendu plus équilibré et encore plus ressemblant (même si je le trouve déjà bien ressemblant comme ça! ;) ) En tout cas, c'est vraiment du bon boulot!
For this course I stuck to the rough outline in order to integrate the different stages as well as two slightly more advanced portraits (the one on the right that I had made previously and the one at the bottom that I made after the course).
In the end I realize that on the faces in front and in profile it's pretty much okay (even if there's a lot of work on the eyes, nose and mouth).
On the other hand, as soon as the face rotates I have a lot more trouble with the placement and size of the different elements (notably the eyes) despite the method (see bottom drawing).
For the nose and mouth it requires a lot of revisions and adjustments but I can't arrive at something correct.
I thank you in advance for your correction and your comments.
Dorine
Bonjour,
Pour ce cours je suis restée sur de l'ébauche de façon à intégrer les différentes étapes ainsi que deux portraits un peu plus poussés (celui de droite que j'avais fait précédement et celui du bas que j'ai fait après le cours).
Au final je me rends compte que sur les visages de face et de profil ça va à peu près (même s'il y a beaucoup de boulot sur les yeux , le nez et la bouche).
Par contrecontre dès que le visage pivote j'ai beaucoup plus de mal de mal sur la mise en place et la dimension des différents éléments (notament les yeux) malgré la méthode (cf. dessin du bas).
Pour le nez et la bouche cela me demande beaucoup de reprises et d'ajustement mais j'arrive plus à quelque chose de correct.
Je vous remercie par avance pour votre correction et vos remarques.
Hello Dodo07081, well it’s really good work I think! Indeed, the front and profile views are the “easiest” to approach, because they are “flat” views. The three-quarter view brings perspective to the face, and this is what can be confusing in the construction of the latter: the eyes are no longer centered and are no longer quite the same size (there is one a little closer to the observer than the other, which is sometimes slightly hidden by the bridge of the nose, the latter itself no longer being in the center of the face) In short, lots of small adjustments to tame, but you look very good get out of it! Afterwards, I suppose that here too, you work from photos, and there I cannot judge the resemblance with the model. But when it comes to facial balance, you're not missing much! Pay attention to the distance and proportions of the eyes. Always move the nose slightly towards the outside of the face, and be careful that the mouth is not too low and close to the chin, it will rather tend, depending on the angle, to come closer to the nose, or even to be hidden from it! In any case, it's really great! :)
Bonjour Dodo07081, hé ben c'est vraiment du bon boulot je trouve! Effectivement, les vues de face et de profil sont les plus "faciles" à aborder, car ce sont des vues "plates". La vue de trois quart amène de la perspective dans le visage, et c'est ce qui peut dérouter dans la construction de ce dernier: les yeux ne sont plus centrés et ne font plus tout à fait la même taille (il y en a un un peu plus proche de l'observateur que l'autre, qui lui se trouve parfois légèrement caché par l'arête du nez, ce dernier n'étant lui même plus au centre du visage) Bref, plein de petits ajustements à apprivoiser, mais tu as l'air de très bien t'en tirer! Après, je suppose que là aussi, tu travailles d'après photo, et là je ne peux pas juger de la ressemblance d'avec le modèle. Mais pour ce qui est de l'équilibre du visage, il ne te manque pas grand chose! Attention donc à l'écart et les proportions des yeux. Déplace toujours légèrement le nez vers l'extérieur du visage, et attention à ce que la bouche ne soit pas trop basse et proche du menton, elle aura plutôt tendance selon l'angle à se rapprocher du nez, voir à en être caché! En tout cas, c'est vraiment super! :)
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 51
04/02/2024
Well, so there you go... a bit convoluted, all that ð
Bon, ben du coup, voilà... un peu biscornu tout ça 😅
Want to learn drawing?
See our coursesInteractions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 1456
07/02/2024
Hey! If faces look odd to you, it's because their construction is not balanced, which creates problems with proportions. Visualize the head in two parts: a ball for the skull, and a lower part for the jaw. Lay out your guide lines taking into account the viewing angle, this will affect the placement of the face.
Keep practicing making faces, it's already very good! ^^
Re! Si tes visage te semblent biscornus, c'est parce que leur construction n'est pas équilibrée, ça créé des problèmes de proportions. Visualise la tête en deux parties: une boule pour le crâne, et une partie inférieure pour la mâchoire. Pose tes lignes de repère en prenant en compte l'angle de vue, cela influera sur le placement du visage.
Continue de t'entraîner à faire des visages, c'est déjà très bien! ^^
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 26
21/02/2024
hello
here is my attempt at a face, with the model... who doesn't deserve this ;)
thank you for your comments
good day
bonjour
voici mon essai de visage, avec le modèle.... qui ne mérite pas ça ;)
merci pour vos commentaires
bonne journée
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 1456
28/02/2024
Good evening Sylyan, you shouldn't be too hard on yourself either, it's already a good start! There's mainly a problem with the construction of the face, and your eyes are a bit too big and placed too high... Before you start detailing your drawing, make sure to properly prepare the construction by visualizing the general shape of the head, the hairline, and especially the guidelines for the placement of facial features (eyes, nose, ears, mouth), as you can see in my correction! ;)
Bonsoir Sylyan, il faut pas non plus être trop dur avec toi même, c'est déjà un bon début! Il y a surtout un problème de construction dans le visage, et tes yeux sont un peu trop grands et placés trop haut... Avant de te lancer dans les détails de ton dessin, veille à bien préparer la construction en visualisant la forme générale de la tête, la ligne d'implantation des cheveux, et surtout les lignes de repères pour le placement des éléments du visage (yeux, nez, oreilles, bouche), comme tu peux le voir sur mon correctif! ;)
Interactions
Nombre de sujet(s) : 1
Nombre de réponse(s) : 37
30/06/2025
hello, for this exo I embarked on a study of a port of Mads Mikkelsen 🙂
Hello, pour cet exo je me suis lancé sur une étude d'un portait de Mads Mikkelsen 🙂
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 1456
05/07/2025
Hello Glokta, great work! The portrait is not my specialty, I will be careful not to give you advice on this point, on the other hand I would just say that the elements of the face, nez-yeux-bloche, are a hair small and placed very down. By moving this part and by resizing it a little you will have a more balanced and even more similar rendering (even if I already find it very similar like that !;)) In any case, it's really good job!
Bonjour Glokta, super travail! Le portrait n'étant pas ma spécialité, je vais me garder de te donner des conseils sur ce point, par contre je dirais juste que les éléments du visage, nez-yeux-bouche, sont un poil petit et placé fort vers le bas. En déplaçant cette partie et en la redimensionnant un peu tu auras un rendu plus équilibré et encore plus ressemblant (même si je le trouve déjà bien ressemblant comme ça! ;) ) En tout cas, c'est vraiment du bon boulot!
Try our courses for free
See our coursesInteractions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 41
19/11/2025
Hello,
For this course I stuck to the rough outline in order to integrate the different stages as well as two slightly more advanced portraits (the one on the right that I had made previously and the one at the bottom that I made after the course).
In the end I realize that on the faces in front and in profile it's pretty much okay (even if there's a lot of work on the eyes, nose and mouth).
On the other hand, as soon as the face rotates I have a lot more trouble with the placement and size of the different elements (notably the eyes) despite the method (see bottom drawing).
For the nose and mouth it requires a lot of revisions and adjustments but I can't arrive at something correct.
I thank you in advance for your correction and your comments.
Dorine
Bonjour,
Pour ce cours je suis restée sur de l'ébauche de façon à intégrer les différentes étapes ainsi que deux portraits un peu plus poussés (celui de droite que j'avais fait précédement et celui du bas que j'ai fait après le cours).
Au final je me rends compte que sur les visages de face et de profil ça va à peu près (même s'il y a beaucoup de boulot sur les yeux , le nez et la bouche).
Par contrecontre dès que le visage pivote j'ai beaucoup plus de mal de mal sur la mise en place et la dimension des différents éléments (notament les yeux) malgré la méthode (cf. dessin du bas).
Pour le nez et la bouche cela me demande beaucoup de reprises et d'ajustement mais j'arrive plus à quelque chose de correct.
Je vous remercie par avance pour votre correction et vos remarques.
Dorine
Interactions
Nombre de sujet(s) : 0
Nombre de réponse(s) : 1456
19/11/2025
Hello Dodo07081, well it’s really good work I think! Indeed, the front and profile views are the “easiest” to approach, because they are “flat” views. The three-quarter view brings perspective to the face, and this is what can be confusing in the construction of the latter: the eyes are no longer centered and are no longer quite the same size (there is one a little closer to the observer than the other, which is sometimes slightly hidden by the bridge of the nose, the latter itself no longer being in the center of the face) In short, lots of small adjustments to tame, but you look very good get out of it! Afterwards, I suppose that here too, you work from photos, and there I cannot judge the resemblance with the model. But when it comes to facial balance, you're not missing much! Pay attention to the distance and proportions of the eyes. Always move the nose slightly towards the outside of the face, and be careful that the mouth is not too low and close to the chin, it will rather tend, depending on the angle, to come closer to the nose, or even to be hidden from it! In any case, it's really great! :)
Bonjour Dodo07081, hé ben c'est vraiment du bon boulot je trouve! Effectivement, les vues de face et de profil sont les plus "faciles" à aborder, car ce sont des vues "plates". La vue de trois quart amène de la perspective dans le visage, et c'est ce qui peut dérouter dans la construction de ce dernier: les yeux ne sont plus centrés et ne font plus tout à fait la même taille (il y en a un un peu plus proche de l'observateur que l'autre, qui lui se trouve parfois légèrement caché par l'arête du nez, ce dernier n'étant lui même plus au centre du visage) Bref, plein de petits ajustements à apprivoiser, mais tu as l'air de très bien t'en tirer! Après, je suppose que là aussi, tu travailles d'après photo, et là je ne peux pas juger de la ressemblance d'avec le modèle. Mais pour ce qui est de l'équilibre du visage, il ne te manque pas grand chose! Attention donc à l'écart et les proportions des yeux. Déplace toujours légèrement le nez vers l'extérieur du visage, et attention à ce que la bouche ne soit pas trop basse et proche du menton, elle aura plutôt tendance selon l'angle à se rapprocher du nez, voir à en être caché! En tout cas, c'est vraiment super! :)
You must be logged in to reply on the forum.